Topics in this digest:
1. CLARFICATION ON NEPP OPTION REGARDING
From: ramesh kannan
2a. usage check in broadband.
From: B.S.SWAMY
2b. Re: usage check in broadband.
From: pardha sarathi
2c. Re: usage check in broadband.
From: ajit singh
3a. Re: LTC Eligibility
From: Bandhan.P.Singh
3b. Re: LTC Eligibility
From: SPA Gopalan
3c. Re: LTC Eligibility
From: ANIL Ph
3d. Re: LTC Eligibility
From: Nitin Patwardhan
4. Use your mobile phone only for 24 mins a day: Study
From: Bandhan.P.Singh
5a. Re: Guidelines Req. Reg. Further Study (TTA)
From: shamsul huda
5b. Re: Guidelines Req. Reg. Further Study (TTA)
From: Senthil A
5c. Re: Guidelines Req. Reg. Further Study (TTA)
From: Bhaumik Patel
6. Food Poisoning: Health Tip of the Day!
From: Bandhan.P.Singh
7.1. MUTUAL TRANSFER
From: anu radha
8. 3G tech vulnerable to cyber crime, says experts
From: Bandhan.P.Singh
9.1. mutual transfer
From: chauhan245716
10a. Re: : CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
From: Suresh Kulla
11. PENDING TRANSFER CASE
From: ajit singh
12. Regarding Take Telephone on Res. DOT category On Working station and
From: Mahesh chand Meena
Messages
________________________________________________________________________
1. CLARFICATION ON NEPP OPTION REGARDING
Posted by: "ramesh kannan" rameshkannan79@yahoo.co.in rameshkannan79
Date: Thu Dec 9, 2010 6:32 am ((PST))
HI FRIENDS
IN OUR SSA 1ST PROMOTION WORKS ARE GOING ON.NOW THEY ASKED FOR AN OPTION
1.INCREMENT DATE
2.APPOINTMENT DATE
SO FRIENDS IF ANY ONE CAN PLS CLARIFY WHICH WILL BE THE BEST OPTION IN DETAIL AND HOW?
RAMESH J
TTA NAGERCOIL
TAMILNADU
919443163585
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
2a. usage check in broadband.
Posted by: "B.S.SWAMY" bsswamy_73@yahoo.co.in bsswamy_73
Date: Thu Dec 9, 2010 6:32 am ((PST))
hello broadband friends.,
When broadband is created created in CDR. TO CHECK THE USAGE at customer end we
will use: selfcare.wdc.bsnl.co.in site but being broadband engineer how can
we check. the current usage at portal pl tell me any body.
regards
b.s.swamy
9422961414
Messages in this topic (3)
________________________________________________________________________
2b. Re: usage check in broadband.
Posted by: "pardha sarathi" gpsl31@yahoo.com gpsl31
Date: Thu Dec 9, 2010 10:56 pm ((PST))
we can check from crm itself in invoices screen we will find bb billed and bb unbilled usage tabs also pl check
pardhasarathi
tta hyderabad
--- On Thu, 9/12/10, B.S.SWAMY <bsswamy_73@yahoo.co.in> wrote:
From: B.S.SWAMY <bsswamy_73@yahoo.co.in>
Subject: TTABSNL usage check in broadband.
To: "ttabsnl" <TTABSNL@yahoogroups.com>
Date: Thursday, 9 December, 2010, 1:57 PM
hello broadband friends.,
When broadband is created created in CDR. TO CHECK THE USAGE at customer end we will use: selfcare.wdc.bsnl.co.in site but being broadband engineer how can we check. the current usage at portal pl tell me any body.
regards
b.s.swamy
9422961414
Messages in this topic (3)
________________________________________________________________________
2c. Re: usage check in broadband.
Posted by: "ajit singh" ajit_singhask@yahoo.com ajit_singhask
Date: Fri Dec 10, 2010 1:58 am ((PST))
hi swamy, You have to book a docket for its user details. AJIT SINGH KUSHWAH TTA-NIB/VAS ,GWALIOR
--- On Thu, 9/12/10, B.S.SWAMY <bsswamy_73@yahoo.co.in> wrote:
From: B.S.SWAMY <bsswamy_73@yahoo.co.in>
Subject: TTABSNL usage check in broadband.
To: "ttabsnl" <TTABSNL@yahoogroups.com>
Date: Thursday, 9 December, 2010, 1:57 PM
hello broadband friends.,
When broadband is created created in CDR. TO CHECK THE USAGE at customer end we will use: selfcare.wdc.bsnl.co.in site but being broadband engineer how can we check. the current usage at portal pl tell me any body.
regards
b.s.swamy
9422961414
Messages in this topic (3)
________________________________________________________________________
________________________________________________________________________
3a. Re: LTC Eligibility
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Thu Dec 9, 2010 6:32 am ((PST))
hi,
u did not need to have 40 ELs at all... this is absurd ruling.
one can go on LTC on 3 days also.i availed LTC on my 4 Casual Leave recently
on AIC, goa.
bandhan
On Thu, Dec 9, 2010 at 10:07 AM, rahul kaushik <rahul_kaushik_mail@yahoo.com
> wrote:
>
>
> hello friend
> To Avail LTC u must have 30 Earned Leave Balance in ur pocket .
> It Means u must have 40+ EL by which u can have 30 balance after avail 10
> of them for LTC.so I think U cant avail LTC at this moment but from Jan,2011
> u can avail.
>
>
>
> Rahul Kaushik
> T.T.A.
> Rohtak(Haryana)
>
>
> --- On *Tue, 12/7/10, phanil <phanil@rocketmail.com>* wrote:
>
>
> From: phanil <phanil@rocketmail.com>
> Subject: TTABSNL LTC Eligibility
> To: TTABSNL@yahoogroups.com
> Date: Tuesday, December 7, 2010, 7:34 PM
>
>
>
> Hi dear friend
>
> I am Anil from Kersls Circle.I had joined as TTA on Sep/2010 (On
> probation).Can you tell me that whether I can avail LTC now ?
>
> ANIL.P.H
> Palakkad SSA
> Kerala
> 9497421795
>
>
>
>
--
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (7)
________________________________________________________________________
3b. Re: LTC Eligibility
Posted by: "SPA Gopalan" spa_gopalan@yahoo.com spa_gopalan
Date: Thu Dec 9, 2010 6:39 am ((PST))
Hai Friend ,
As per LTC Rules of BSNL once employee completed his one year of service in BSNL is elegible to avail LTC. LTC may avail thro' EL or MC or CL
s.p.a.gopalan
TTA Groups - I
Tiruvarur
--- On Wed, 12/8/10, rahul kaushik <rahul_kaushik_mail@yahoo.com> wrote:
From: rahul kaushik <rahul_kaushik_mail@yahoo.com>
Subject: Re: TTABSNL LTC Eligibility
To: TTABSNL@yahoogroups.com
Date: Wednesday, December 8, 2010, 8:37 PM
hello friend
To Avail LTC u must have 30 Earned Leave Balance in ur pocket .
It Means u must have 40+ EL by which u can have 30 balance after avail 10 of them for LTC.so I think U cant avail LTC at this moment but from Jan,2011 u can avail.
Rahul Kaushik
T.T.A.
Rohtak(Haryana)
--- On Tue, 12/7/10, phanil <phanil@rocketmail.com> wrote:
From: phanil <phanil@rocketmail.com>
Subject: TTABSNL LTC Eligibility
To: TTABSNL@yahoogroups.com
Date: Tuesday, December 7, 2010, 7:34 PM
Hi dear friend
I am Anil from Kersls Circle.I had joined as TTA on Sep/2010 (On probation).Can you tell me that whether I can avail LTC now ?
ANIL.P.H
Palakkad SSA
Kerala
9497421795
Messages in this topic (7)
________________________________________________________________________
3c. Re: LTC Eligibility
Posted by: "ANIL Ph" phanil@rocketmail.com phanil@rocketmail.com
Date: Thu Dec 9, 2010 6:39 am ((PST))
Hi RahulThanks to your reply
Anil.PH
--- On Thu, 12/9/10, rahul kaushik <rahul_kaushik_mail@yahoo.com> wrote:
From: rahul kaushik <rahul_kaushik_mail@yahoo.com>
Subject: Re: TTABSNL LTC Eligibility
To: TTABSNL@yahoogroups.com
Date: Thursday, December 9, 2010, 4:37 AM
hello friend
To Avail LTC u must have 30 Earned Leave Balance in ur pocket .
It Means u must have 40+ EL by which u can have 30 balance after avail 10 of them for LTC.so I think U cant avail LTC at this moment but from Jan,2011 u can avail.
Rahul Kaushik
T.T.A.
Rohtak(Haryana)
--- On Tue, 12/7/10, phanil <phanil@rocketmail.com> wrote:
From: phanil <phanil@rocketmail.com>
Subject: TTABSNL LTC Eligibility
To: TTABSNL@yahoogroups.com
Date: Tuesday, December 7, 2010, 7:34 PM
Hi dear friend
I am Anil from Kersls Circle.I had joined as TTA on Sep/2010 (On probation).Can you tell me that whether I can avail LTC now ?
ANIL.P.H
Palakkad SSA
Kerala
9497421795
Messages in this topic (7)
________________________________________________________________________
3d. Re: LTC Eligibility
Posted by: "Nitin Patwardhan" patwardhan.nitin@yahoo.in patwardhan.nitin
Date: Fri Dec 10, 2010 3:39 am ((PST))
you can avail LTC select longest station in ur tour as last pt. you can take advance also.
--- On Wed, 8/12/10, Hem Tripathi <hem_bsnl@yahoo.co.in> wrote:
From: Hem Tripathi <hem_bsnl@yahoo.co.in>
Subject: Re: TTABSNL LTC Eligibility
To: TTABSNL@yahoogroups.com
Date: Wednesday, 8 December, 2010, 3:31 PM
i think.you aren't eligible, contact ur admn sec.
From: phanil <phanil@rocketmail.com>
To: TTABSNL@yahoogroups.com
Sent: Tue, 7 December, 2010 7:34:04 PM
Subject: TTABSNL LTC Eligibility
Hi dear friend
I am Anil from Kersls Circle.I had joined as TTA on Sep/2010 (On probation).Can you tell me that whether I can avail LTC now ?
ANIL.P.H
Palakkad SSA
Kerala
9497421795
Messages in this topic (7)
________________________________________________________________________
________________________________________________________________________
4. Use your mobile phone only for 24 mins a day: Study
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Thu Dec 9, 2010 6:38 am ((PST))
*Use your mobile phone only for 24 mins a day: Study
*While we all chat for hours on our mobile phones, we don't realise that
the long exposure to radiation from the handset could be harmful. *All
mobile phones have a SAR (Specific Absorption Rate) rating. In the US, SAR
limit for mobile phones is 1.6w/kg that translates into a usage for** six
minutes a day*. *This limit has a safety margin of three to four, so a
person should not use a mobile phone for more than 18 to 24 minutes a day
because of the harmful effects of its radiation. *
This recommendation is part of a 30-page report complied by professor Girish
Kumar from the electrical engineering department of the Indian Institute of
Technology Bombay.
The report, a compilation prepared after studying more than 100 research
papers and interaction with people, has been sent to the Department of
Telecommunications in Delhi.
*The report shows the kind of radiation people living and working around
cell phone towers are exposed to. A majority of cell phone towers are near
residential and commercial buildings to provide good mobile coverage to
users*. The report states: "These towers transmit signals 24x7 so people
living within 10m from the tower will get 10,000 to 1,00,000 times stronger
signal than required for mobile communication. In India, crores of people
reside within these high-radiation zones."
The radiation norms adopted by India are less stringent than those in
developed countries. The report states that radiation measurements carried
out in Mumbai and Delhi show high radiation levels at places such as the
Khar bridge in Mumbai and the Delhi-Gurgaon Highway Bridge. Some studies
state that cell phone radiation can affect male fertility. Others state that
it is harmful for pregnant women and can damage DNA.
The report recommends tightening radiation norms, which must be
cost-effective. It says that all operators must be instructed that power
density in schools, hospitals and at common frequently visited places should
be within these guidelines.
--
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
5a. Re: Guidelines Req. Reg. Further Study (TTA)
Posted by: "shamsul huda" huda_muthaleef@yahoo.com huda_muthaleef
Date: Thu Dec 9, 2010 6:39 am ((PST))
Submit your admission letter from college with prospectus, along with a letter to DGM, stating that you wish to pursue higher studies. Please keep the permission letter from DGM office safe, so as to claim incentive after completion of your degree.
Shamsul HUda, TTA, Chennai
--- On Wed, 8/12/10, Bhaumik Patel <bhaumik.patel01@yahoo.com> wrote:
From: Bhaumik Patel <bhaumik.patel01@yahoo.com>
Subject: TTABSNL Guidelines Req. Reg. Further Study (TTA)
To: "TTA BSNL" <TTABSNL@yahoogroups.com>
Date: Wednesday, 8 December, 2010, 2:37 PM
Dear Friends,
If anybody has idea about how to apply for further study (i.e. ME/M-Tech/MBA) while working as Dr. TTA (BE Holder), kindly give some guidance.
If it is possible then kindly inform me that how to take permission from management of it.
Thank You All.......
Messages in this topic (4)
________________________________________________________________________
5b. Re: Guidelines Req. Reg. Further Study (TTA)
Posted by: "Senthil A" kavin200802111@ymail.com kavin200802111@ymail.com
Date: Thu Dec 9, 2010 6:39 am ((PST))
Hi
i am senthil TTA (Trichy SSA - TN Circle ) with the qualification of B.E.Now I studying the ME ( Part Time- Weekend class) at Anna university Madurai with the permission of HR/Admn.So Search such type of college nearer to your place.
by
senthil
Messages in this topic (4)
________________________________________________________________________
5c. Re: Guidelines Req. Reg. Further Study (TTA)
Posted by: "Bhaumik Patel" bhaumik.patel01@yahoo.com bhaumik.patel01
Date: Thu Dec 9, 2010 3:38 pm ((PST))
Thanks..........
--- On Thu, 9/12/10, Senthil A <kavin200802111@ymail.com> wrote:
From: Senthil A <kavin200802111@ymail.com>
Subject: Re: TTABSNL Guidelines Req. Reg. Further Study (TTA)
To: TTABSNL@yahoogroups.com
Date: Thursday, 9 December, 2010, 1:28 PM
Hi
i am senthil TTA (Trichy SSA - TN Circle ) with the qualification of B.E.Now I studying the ME ( Part Time- Weekend class) at Anna university Madurai with the permission of HR/Admn.So Search such type of college nearer to your place.
by
senthil
Messages in this topic (4)
________________________________________________________________________
________________________________________________________________________
6. Food Poisoning: Health Tip of the Day!
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Thu Dec 9, 2010 3:37 pm ((PST))
--
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
7.1. MUTUAL TRANSFER
Posted by: "anu radha" anupadala@yahoo.co.in anupadala
Date: Thu Dec 9, 2010 3:38 pm ((PST))
hai
friends iam working in a.p circle Hyderabad (ssa) .any body who
belongs to this district who are working at visakhapatnam
.plz contact me mobile number 9493240108 or anu9268@gmail.com for mutual transfer
kindly add my data to database
Messages in this topic (41)
________________________________________________________________________
________________________________________________________________________
8. 3G tech vulnerable to cyber crime, says experts
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Thu Dec 9, 2010 3:38 pm ((PST))
*3G tech vulnerable to cyber crime, says experts*
As 3G mobile services are set to be rolled out soon in the country, cyber
experts sound a word of caution about the high tech enabled mobile phones,
which they say are more vulnerable in the world of technology related
crimes.
*While the next generation technology aims to make life simpler enabling
downloading of movies and music within minutes, it can also be used for
various unscrupulous activities.*
"With 3G, cellphones will have faster broadband Internet and with such speed
you can watch television live, make video calls and download music and
movies in no time. But through spying software and virus, the hacker can
easily break into your system," says Ankit Fadia, an ethical hacker and
cyber security expert.
*"The hacker can record all the audio conversation and video files. Not many
people in India install anti-virus in the phones. I would recommend them to
install anti-virus and fireballs while using 3G, says Fadia who recommends
switching off the bluetooth function of the phone when not required to
protect the user's password.*
Not limited to an individual's privacy issues, the 3G technology will also
lead to increase in piracy of films and music, thereby giving a staggering
amount of losses to the entertainment industry that is battling the piracy
threat.
"It will become extremely easy for anybody to download an entire Bollywood
film in few minutes using 3G. This is going to lead to further tremendous
growth of websites like torrents," says advocate Pavan Duggal, a cyberlaws
expert.
The Internet and Mobile Association of India (IAMAI) points out that
Bollywood would be hit most by the 3G and wants service providers to adopt a
stricter approach to check cybercrimes.
"Today it takes several hours to download a new release Bollywood film but
with 3G it will be in minutes that will encourage people to use illegal
means to view a film," says Rakshit Tandon, consultant, IAMAI.
According to a PricewaterhouseCoopers report titled, "Indian 3G broadband
subscribers," the mobile subscriber base is projected to cross one billion
in 2014. The 3G broadband subscriber base is expected to cross 107 million
by 2015.
*Indian law enforcement lacks the necessary training to deal with
cyber-crimes and there is a distinct need for amending the law and making
security agencies aware about the Internet, say experts.*
"Laws are there to protect but our police agencies are yet not ready to
take-up the cyber crime challenges, especially 3G. They need to be trained
to tackle the growing usage of Internet by criminals," says Fadia.
Duggal, who is a Supreme Court lawyer, says there is a distinct need for
amending the law so as to provide for far more broad generic provisions
which can withstand the onslaught of any other new technology.
"Further adequate statutory protections needs to be given to users so that
whatever limited right to privacy they have in the context of the electronic
ecosystem are not appropriately compromised with the advent of new
technology," he says.
*As mobile handsets is becoming an integral part of the consumer experience,
the availability of a large number of feature-rich handsets at affordable
prices or in attractive bundled offers is likely to further drive the
adoption of 3G value-added services, according to a report by RNCOS.*
The industry analysis provider also predicts that the number of 3G mobile
subscribers is expected to grow at a CAGR of around 80 per cent during
2011-2013.
--
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
9.1. mutual transfer
Posted by: "chauhan245716" chauhan245716@yahoo.com chauhan245716
Date: Thu Dec 9, 2010 10:56 pm ((PST))
hi
there is anyone who is posted as TTA in Bijnor SSA n want to come in Moradabad SSA
Messages in this topic (82)
________________________________________________________________________
________________________________________________________________________
10a. Re: : CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
Posted by: "Suresh Kulla" suresh_kulla@yahoo.in suresh_kulla
Date: Fri Dec 10, 2010 3:39 am ((PST))
Dear Bandhanji
We have Handtel ITI model 800A fwt.I want drivers to send fax from pc to this
model phone.Please can u provide this?
K Suresh tta A.P
________________________________
From: Bandhan.P.Singh <email13@gmail.com>
To: TTABSNL@yahoogroups.com
Sent: Wed, 8 December, 2010 10:24:29 PM
Subject: Re: TTABSNL : CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
hi friends,
those who need more knowledge can see the below link from where these codes are
taken
http://forum.gsmhosting.com/vbb/f128/all-cdma-secret-codes-347440/
regards,
Bandhan Preet Singh
On Wed, Dec 8, 2010 at 4:00 PM, Priyesh Varghese <mail2priyesh@gmail.com> wrote:
>
>
>
>
>
>CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
>　
>　
>Samsung:All type of phones (old modeles):
>NAM programming: 47*869#08#9
>Test mode: *759#813580 or 5809540*45680
>exit test mode - 02
>A-Key: menu + 0, code 25## Samsung A500
>1. Enter ## and the 6 digit OTKSL
>2. SERVICE MENU will appear and 1.Basic will be highlighted
>3. Press OK
>4. Device will display NAM CDMA/ Phone Number
>5. Enter 10 digit MIN
>6. Press OK (3 times)
>7. Display will return to Service Menu. Press END.
>8. Programming is complete Samsung N240 and N400
>1. Enter ## and type in the 6 digit OTKSL
>2. The display will show SVC MENU and 1. Phone Number
>3. Press OK
>4. Enter the 10 digit MIN and press OK
>5. The display will show NAM with Home SID on the second line (Note: SID is no
>longer used)
>
>6. Press OK
>7. The display will return to the SVC MENU
>8. Press END to complete the programming Samsung Uproar
>1. Press MENU key
>2. Enter 9 2 0
>3. Enter the OTKSL
>4. At SVC Menu screen press OK
>5. Enter MIN and press OK 4 times
>6. Enter SID (4654) and press OK
>7. Press END key
>8. Programming is complete Samsung N300
>1. Press ## followed by the OTKSL
>2. SVC menu will be displayed
>3. Press 1 for Phone #
>4. Enter the 10 digit MIN and press OK
>5. MIN that was entered will be displayed press OK
>6. SVC Menu will display press 3 for NAM
>7. Enter the 4 digit Home SID press OK
>8. Press END and handset will power cycle Samsung i300
>1. Tap on the Phone Icon with stylus
>2. Press #907*9#0 ENTER LOCK should appear on screen
>3. ENTER OTKSL
>4. SVC MENU will appear press 1
>5. Enter 10 digit MIN and then press SAVE
>6. Press SAVE again
>7. Press 3 and then press SAVE 6 times
>8. Enter the HOME SID and press SAVE once
>9. Press END key twice Samsung A400 and A460
>1. Enter ## and OTKSL
>2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
>3. Enter 10 digit MIN and press OK
>4. At 1.Basic Menu press the END key
>5. Handset will power cycle Samsung 3500 8500 6100 N200
>1. Press MENU
>2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
>3. Enter OTKSL
>4. Press 1 at SVC MENU Screen
>5. Enter MIN and press OK
>6. Press OK 4 times
>7. Enter SID (4654) and press OK
>8. Press END key
>9. Programming is complete Qualcomm:QCP-800programming: menu + 3 + 0.
>SPC: "000000" or may be other SPC typed by user. QCP-820/1920/2035: type
>"111111" and press Jog Dial.
>
>Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
>QCP 1960 and 2760
>
>1. Press softkey under the work MENU
>2. Press 8 0
>3. Enter the OTKSL
>4. Press softkey for OK
>5. Enter MIN and press softkey for OK
>6. No SID is require for this handset
>7. Press softkey for EXIT
>8. Programming is complete LG:LGC-300programming: menu + 9 and enter SPC:
>"000000" or may be other SPC typed by user
>
>A-Key: press STO for some time while you can see special code enter zone. Type
>2539** and enter A-key LGC-330Wprogramming: menu + 4 + 0 and enter SPC: "000000"
>or may be other SPC typed by user.
>
>A-Key: type 2539** and enter A-key LGC-800W /500programming: menu + 0 and enter
>SPC: "000000" or may be other SPC typed by user.
>
>A-Key: type 2539** and enter A-key LGC-510programming: menu + 3 + 0 and enter
>SPC: "000000" or may be other SPC typed by user.
>
>A-Key: type 2539** and enter A-key LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB
>TP 1100 TP5200
>1. Press ##
>2. Enter the OTKSL
>3. Scroll to SAVE and press OK
>4. Scroll to MIN and press OK
>5. Enter 10 digit MIN scroll to SAVE and press OK
>6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to
>complete)
>
>7. Enter SID (4654) and scroll to SAVE and press OK
>8. Programming is complete LG5350
>1. Enter ## and enter the OTKSL and press the left soft key under the word
>"Save"
>
>2. At the Service Program display select Mobile Phone # and press the OK in the
>center of the 4 way navigation key
>
>3. Enter the 10 digit MIN and press OK
>4. Scroll down to 4. Advanced and press OK
>5. Scroll to NMSI and press OK
>6. Enter the MSID and press OK
>7. Scroll down to 9. Amps Phone # and press OK
>8. Enter the MSID and press OK
>9. Press the END key TP 2100
>1. Press ##
>2. Enter OTKSL
>3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
>4. Select NEXT (by pressing in the roller ball)
>5. Scroll to EDIT and press in the roller ball
>6. Enter MIN
>7. Scroll to SAVE and press roller ball in
>8. Select NEXT at the next 3 screens and then EXIT
>9. Programming is complete TP3000
>1. Press ##
>2. Enter OTKSL
>3. Scroll to SAVE and press OK
>4. Open flip
>5. Use Stylus to enter the 10 digit MIN
>6. Press OK (No SID entry is required)
>7. Programming is complete TP 5250
>1. Press ##
>2. Enter the OTKSL
>3. Scroll to SAVE and press OK
>4. The phone display will read SVC Program
>5. Scroll to MOBILE PHONE # and press OK
>6. Phone display will read Mobile Phone Number
>7. Enter the 10 digit MIN and press OK
>8. Scroll to Home SID and press OK
>9. Enter the 4 digit SID (4654) and press OK
>10. Reset Phone will be highlighted. Press OK
>11. Phone will reset
>12. Programming is complete LG V111(DM110)
>[menu]30.
>After ask lockcode, enter: 843691. Ericsson:
>Programming:
>Shot NAM 987 + menu
>Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by
>user.
>
>CDMA mode 904093 + menu
>Analog mode 904095 + menu DM mode 904959 + menu Hyundai:HGC-120E /
>-130Eprogramming: #86904**89397# HGC-600Eprogramming: ##20022002, END and enter
>SPC: "000000" or may be other SPC typed by user.
>Sony:CM-M1300/3300/Z200programming: type "111111" and press Jog Dial.
>
>Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
>Sony CM-M1300
>1. Power phone on
>2. Enter six "1s" ( 111111 )
>3. Press the jog dial in
>4. Press the jog dial in again to select programming
>5. Enter six "0s" for the service security code
>6. Phone displays the ESN
>7. Press the jog dial in for OK
>8. Enter your ten digit cellular telephone number
>9. Press the jog dial in for OK
>10. Enter your cellular carrier’s system ID (SID) without the zeros
>(Example: if your carrier’s system ID is 00035, enter just 35)
>11. Press the jog dial in for OK
>12. Enter a name for NAM 1 or just press the jog dial in for OK
>13. Phone displays Basic NAM 1 Programming is complete
>14. Press the jog dial in
>15. Press the jog dial in again for EXIT
>16. Phone powers itself off
>17. Press the power button to power the phone back on
>18. Basic programming is complete Motorola:StarTAC 7760/7860programming:
>Service menu: FCN+0+000000+000000+RCL
>Test mode: FCN 00**83786633 STO V60cprogramming:
>Service menu: 74663 # [Menu] [Menu] (programming code)
>Test mode: [Menu] 073887 * (security code = 000000) Motorola Tarpon (120x)
>1. Press 74663 (spells PHONE)
>1. Press # MENU MENU quickly
>2. Enter OTKSL
>3. The work MIN will be highlighted
>4. Select the word CHANGE by selecting the top right button
>5. Select DELETE. Press and hold the button until clear
>6. Have the customer enter the 10 digit MIN number
>7. Select OK with the top right button. The "User Activation" screen will appear
>
>8. Scroll to highlight the CDMA Sys ID
>9. Select CHANGE by selecting the top right button
>10. Enter SID
>11. Select OK by selecting the top right button
>12. Select DONE with the top left button
>13. Press the END key
>14. Press # MENU MENU quickly
>15. Enter OTKSL
>16. The work MIN will be highlighted
>17. Select the word CHANGE by selecting the top right button
>18. Select DELETE. Press and hold the button until clear
>19. Have the customer enter the 10 digit MIN number
>20. Select OK with the top right button. The "User Activation" screen will
>appear
>
>21. Scroll to highlight the CDMA Sys ID
>22. Select CHANGE by selecting the top right button
>23. Enter SID
>24. Select OK by selecting the top right button
>25. Select DONE with the top left button
>Press the END key Motorola Phones (ALL)
>1. Enter 74663 # FCN FCN
>2. Enter OTKSL
>3. Enter MIN and press STO
>4. Enter SID (4654) and press STO
>5. Press STO again â€" programming is complete
>Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.
>Nokia:5185/6185programming: *3001#12345#
>
>Software version: *#837# or *#VER# or *#9999#
>Serial / ESN: *#92772689# or *#WARRANTY#
>Phone reset: *#75681# or *#75682# Nokia 6185-5170
>1. Press *#639#
>2. Enter OTKSL and press OK
>3. Enter the MIN and select OK
>4. Enter the SID and select OK
>5. Programming is complete Nokia 3585
>1. Enter ## followed by the OTKSL
>2. Number (MDN) is highlighted. Press the upper left-hand soft key to select
>3. Mobile Number will display. Enter the 10 digit MIN
>4. Press OK
>5. IMSI will appear. Press and hold the Clear key until the display is empty.
>6. Enter 31000 plus the MSID (15 digits total)
>7. Press the upper left hand soft key and select OK
>8. It will take you back to the SVC Programming. Press the upper right hand soft
>key to select EXIT
>
>9. Press END.
>10. Phone will power cycle and programming is complete. SK Teletech:SK-IM
>1000/1400/2000/2200/2400programming: #7583538324#626# Getrun 2000:
>System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
>Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
>Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
>Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
>System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)
>NEOPOINT:Neopoint 1000
>
>1. Press M to display Main Menu
>2. Scroll to PREFERENCES
>3. Press softkey under SELECT
>4. Enter 040793
>5. Scroll to PROGRAMMING
>6. Press softkey under SELECT
>7. Enter OTKSL
>8. Press softkey under DONE
>9. Scroll to PHONE NUMBER
>10. Enter 10 digit MIN
>11. Scroll to HOME SID
>12. Enter SID (4654)
>13. Press softkey under SAVE to exit
>14. Programming is complete NEOPOINT 1600
>1. Power the phone on
>2. Press the "Menu" key
>3. Scroll to "Preferences" - press "Select"
>4. Key in the "Field Service Code" (the phone will not prompt you for the code)
>at the "preferences" screen to access the "Service" menu (Default code is
>"000000")
>
>5. Scroll to "Programming" - press "Select" - the phone will ask for the
>"Subsidy Lock Code"
>
>6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
>7. Select the NAM to be programmed (NAM 1 or NAM 2)
>8. Program the NAM - Phone number and CDMA Home SID
>9. After programming has been completed press "Save" - the phone will reset
>Audiovox:Audiovox 9100
>1. Press ##
>2. Enter the OTKSL
>3. Display will read Service/Menu 1 Basic…press OK
>4. Next screen will read Service Mode/Home SID…press OK
>5. Next screen will read Service Mode/Home SID…press OK
>6. Device will display Service Menu 1. Basic #
>7. Press END button to complete programming Handspring TREO:
>1. Open the flip and press the PHONEBOOK button one time to display the dial pad
>
>2. Enter ## and the OTKSL using the numbers on the Dial Pad
>3. Press the handset button shown in the diagram above
>4. At the Activations screen enter the MIN in the phone number field using the
>numbers on the device keyboard
>
>5. Put a check in the Enable Number Portability box and type the MSID in the
>MSIN field
>
>6. Press OK
>7. The device will display the network search pop-up and return to the Phonebook
>display Hitachi P300:
>1. Enter ## and the 6 digit OTKSL
>2. Press the Options soft key and then scroll to Save Phone #. Press the OK soft
>key.
>
>3. At the NAM display scroll to EDIT and press the OK soft key
>4. Display will read NAM and MDN will be highlighted. Press the OK soft key.
>5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
>6. At the Save prompt press the OK soft key. The next display will show several
>options that should not edited.
>
>7. Press the EXIT soft key and the device will power cycle.
>8. Programming is complete. Kyosera:Kyocera 2345 1135
>1. Press 111111 (#1 key 6 times)
>2. Option will be highlighted
>3. Press OK
>4. Scroll down to Programming
>5. The service programming dialog will appear Enter Security Code.
>6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
>7. Service Options will appear
>8. Scroll down to the BASIC NAM1 Info
>9. Press OK
>10. Select the Phone Number by pressing the OK key
>11. Using the keypad enter the 10 digit MIN
>12. Press OK
>13. Press END to complete the programming Kyocera 6035
>1. Press 1 six times (111111) and select OPTIONS
>2. Select PROGRAMMING
>3. Open flip
>4. Tap the OTKSL on keypad on the screen. Tap OK
>5. Tap on the PHONE NUMBER field. Enter MIN.
>6. Leave A-KEY blank
>7. Enter HOME SID (4654)
>8. Tap SAVE & EXIT
>9. Tap YES
>10. Phone will be in OFF MODE Close flip. Kyocera 3035
>1. Press 111111 (the #1 key six times)
>2. Options will be highlighted
>3. Press in the navigation key (Navigation key is the button located between the
>TALK & END key)
>
>4. Scroll to PROGRAMMING using the Navigation key
>5. Select PROGRAMMING by pressing in the Navigation key
>6. Enter the six digit OTKSL and press in the navigation key
>7. SERVICE OPTIONS will appear
>8. Scroll down to the Basic NAM1 info
>9. Press in the navigation key
>10. Clear any numbers that may appear using the "clear" key (arrow key located
>directly below the navigation key)
>
>11. Select the PHONE NUMBER by pressing in the navigation key
>12. Enter the 10 digit MIN select OK by pressing in the navigation key
>13. Press END. Programming is complete. Kyocera 2255
>1. Press the 1 key six times (111111) "Option will be highlighted
>2. Press OK
>3. Scroll down to "Programming" and press "OK"
>4. Enter OTKSL and press the navigation key
>5. "Service Options" will appear scroll down to the "Basic NAM1 Info"
>6. Press OK
>7. Select Phone Number by pressing OK
>8. Enter MIN and press OK again
>9. Scroll to Home SID and press OK
>10. Enter SID (4654) and press OK
>11. Press END. Programming is complete. QCP 2035
>1. Press 1 six times (111111)
>2. Press u key to select OPTIONS
>3. Highlight PROGRAMMING and press u key
>4. Enter OTKSL
>5. ESN will appear press left arrow key to select OK
>6. Enter MIN and press ç key
>7. Press ç key again to exit - Programming is complete Sanyo:Sanyo 4000 4500
>4700 5000 6000
>
>1. Press ##
>2. Enter the OTKSL
>3. Scroll to SAVE and press OK
>4. ESN will be displayed â€" press OK
>5. Enter 10 digit MIN and press OK
>6. Enter SID (4654) and press OK
>7. Press OK twice
>8. Programming is complete Sanyo 5150 5300 and 6400
>1. Enter ## followed by the OTKSL
>2. Press MENU SAVE PHONE #
>3. Press Ok
>4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press
>OK
>
>5. Press OK again
>6. ESN will be displayed. Press OK
>7. Mobile Number will be displayed enter the 10 digit MIN press OK
>8. Press OK 4 times
>9. Phone will power cycle
>10. Programming is complete Sanyo 6000
>1. Press ##
>2. Enter OTKSL
>3. Press MENU Key and scroll to SAVE PHONE # and press OK
>4. ESN will be displayed press OK
>5. Enter MIN and press OK
>6. Enter SID and press OK
>7. Press OK twice more
>8. Programming is complete Sanyo 4900
>1. Enter ## followed by the 6 digit OTKSL
>2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
>3. Press MENU/OK
>4. Scroll and highlight MOBILE NUMBER press OK
>5. At the ESN display press OK
>6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
>7. At the service program menu scroll to exit and press the MENU/OK key.
>8. Programming is complete Sanyo 6200
>1. Enter ##
>2. Enter OTKSL
>3. Press the MENU key and scroll to highlight SAVE PHONE #
>4. Press OK
>5. Scroll and highlight MOBILE NUMBER
>6. Press OK twice
>7. Scroll and highlight EXIT
>8. Press OK
>9. Phone will power cycle
>10. Programming is complete Toshiba:Toshiba 2032P
>1. Slide the Radio Standby Switch on the left side of the device to the upper
>side (ON) to activate the phone function. This is the switch with the phone icon
>over it
>
>2. After power up is completed use the stylus to tap on the ADMIN pull up menu
>at the bottom of the screen and select ACTIVATION WIZARD. If your device has not
>yet been activated the ACTIVATION WIZARD will automatically start when you turn
>on the radio in your device.
>
>3. Tap NEXT 3 times. If the device has been previously activated it will require
>only 2 presses.
>
>4. On the fourth screen enter the 6 digit OTKSL using keyboard
>5. Enter the MIN in both entery fields then tap NEXT
>6. Wait for the device to initialize and display "ready to connect"
>7. To initiate IOTA tap the word ADMIN at the bottom of the display and then
>Data Provisioning
>
>8. Programming is complete
>*******
>Here is a list of various codes to try out. Some may require an MSL to be able
>to make full use of the functionality.
>
>##2769737 [##BROWSER] - MiniBrowser Settings (2G)
>##8626337 [##VOCODER] - Set Vocoder
>##3282 [##DATA] - Setup Menu for Vision handsets
>##8463 [##TIME] - Airtime Menu
>##040793 - Debug Menu
>##786 [##RUN] - Technical Information (be careful with this one, you can reset
>the handset)
>
>##932 [##WEB] - IP Address information (2G)
>##889 [##TTY] - TTY On or TTY Off
>##4357 [##HELP] - Help
>
>
>--
>Regards
>Priyesh Varghese
>
--
regards,
Bandhan Preet Singh,
Broadband Engineer (TTA),
BSNL, Mohali, Chd, Punjab.
Think Different...Think Good..!!
"THINK GOOD--SPREAD GOOD, DO GOOD--HAVE GOOD"
Messages in this topic (3)
________________________________________________________________________
________________________________________________________________________
11. PENDING TRANSFER CASE
Posted by: "ajit singh" ajit_singhask@yahoo.com ajit_singhask
Date: Fri Dec 10, 2010 3:39 am ((PST))
DEAR MANISH JI, PLEASE PUT SOME UNION PRESSURE TO SETTLE MY TRANSFER CASE FROM HAMIRPUR (HP) TO GWALIOR (SSA). AS U KNOW THAT 4 TTA HAV LEFT BSNL FROM GWALIOR SSA , IT IMPLIES THAT VACANCIES CREATED FROM DIRECT RECRUITMENT QUOTA . THANKFUL FOR UR VALUABLE SUPPORT AJIT SINGH KUSHWAH
TTA-GWL MOB.NO.9425754520
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
12. Regarding Take Telephone on Res. DOT category On Working station and
Posted by: "Mahesh chand Meena" maheshchand.meena@yahoo.com maheshchand.meena
Date: Fri Dec 10, 2010 3:39 am ((PST))
Dear All TTAs
Good evng
Pls tell me about DOT category facility on residenc for TTA, this facility can take on working station and other palace in same SSA, if anyone know about it then tell me by telephonic or by mail with attach ruling order.
m13iuc@gmail.com
09413782004
With Warm Regards
Er. Mahesh Meena
TTA( BROADBAND &OTHER)
ALWAR, RAJASTHAN
Messages in this topic (1)
Please visit us at www.snatta.org for more details.
------------------------------------------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/TTABSNL/
<*> Your email settings:
Digest Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/TTABSNL/join
(Yahoo! ID required)
<*> To change settings via email:
TTABSNL-normal@yahoogroups.com
TTABSNL-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
TTABSNL-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
------------------------------------------------------------------------
No comments:
Post a Comment