Topics in this digest:
1a. : CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
From: Priyesh Varghese
1b. Re: : CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
From: Bandhan.P.Singh
2. District conference of Guntur SSA A.P. minutes and photos
From: laxman kumar
3. can anybody tell me how much strength we have.
From: vaishakh soni
4a. Re: LTC Eligibility
From: Hem Tripathi
4b. Re: LTC Eligibility
From: rahul kaushik
5. Important Notice for CEC
From: Bandhan.P.Singh
6a. hai
From: ANUSHA THOKALA
7. BSNL seeks 5k cr more to build defence network
From: Bandhan.P.Singh
8. Laser Hair reduction: Health Tip of the Day!
From: Bandhan.P.Singh
9. Poisoning: Health Tip of the Day!
From: Bandhan.P.Singh
10.1. mutual transfer
From: Kamal
11. REGARDING MUTUAL TRANSFER ....
From: shahid ahmed
Messages
________________________________________________________________________
1a. : CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
Posted by: "Priyesh Varghese" mail2priyesh@gmail.com priyeshvarghese
Date: Wed Dec 8, 2010 5:12 am ((PST))
*
CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
Samsung:
**
All type of phones (old modeles)
*:
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##
*
Samsung A500
*
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete
*
Samsung N240 and N400
*
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is
no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming
*
Samsung Uproar
*
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
*
Samsung N300
*
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle
*
Samsung i300
*
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
*
Samsung A400 and A460
*
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle
*
Samsung 3500 8500 6100 N200
*
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete
*
Qualcomm:
**
QCP-800
*programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
*
QCP-820/1920/2035
*: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by
user.
*
QCP 1960 and 2760
*
1. Press softkey under the work MENU
2. Press 8 0
3. Enter the OTKSL
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete
*
LG:
**
LGC-300
*programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by
user
A-Key: press STO for some time while you can see special code enter zone.
Type 2539** and enter A-key
*
LGC-330W
*programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed
by user.
A-Key: type 2539** and enter A-key
*
LGC-800W /500
*programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by
user.
A-Key: type 2539** and enter A-key
*
LGC-510
*programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed
by user.
A-Key: type 2539** and enter A-key
*
LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200
*
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK
to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete
*
LG5350
*
1. Enter ## and enter the OTKSL and press the left soft key under the word
"Save"
2. At the Service Program display select Mobile Phone # and press the OK in
the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key
*
TP 2100
*
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete
*
TP3000
*
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is required)
7. Programming is complete
*
TP 5250
*
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete
*
LG V111(DM110)
*
[menu]30.
After ask lockcode, enter: 843691.
*
Ericsson:
*
Programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by
user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu
*
Hyundai:
**
HGC-120E / -130E
*programming: #86904**89397# *
HGC-600E
*programming: ##20022002, END and enter SPC: "000000" or may be other SPC
typed by user. *
Sony:
**
CM-M1300/3300/Z200
*programming: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by
user.
*
Sony CM-M1300
*
1. Power phone on
2. Enter six "1s" ( 111111 )
3. Press the jog dial in
4. Press the jog dial in again to select programming
5. Enter six "0s" for the service security code
6. Phone displays the ESN
7. Press the jog dial in for OK
8. Enter your ten digit cellular telephone number
9. Press the jog dial in for OK
10. Enter your cellular carrier's system ID (SID) without the zeros
(Example: if your carrier's system ID is 00035, enter just 35)
11. Press the jog dial in for OK
12. Enter a name for NAM 1 or just press the jog dial in for OK
13. Phone displays Basic NAM 1 Programming is complete
14. Press the jog dial in
15. Press the jog dial in again for EXIT
16. Phone powers itself off
17. Press the power button to power the phone back on
18. Basic programming is complete
*
Motorola:
**
StarTAC 7760/7860
*programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
*
V60c
*programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)
*
Motorola Tarpon (120x)
*
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The "User Activation" screen will
appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The "User Activation" screen will
appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key
*
Motorola Phones (ALL)
*
1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again – programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of
FCN.
*
Nokia:
**
5185/6185
*programming: *3001#12345#
Software version: *#837# or *#VER# or *#9999#
Serial / ESN: *#92772689# or *#WARRANTY#
Phone reset: *#75681# or *#75682#
*
Nokia 6185-5170
*
1. Press *#639#
2. Enter OTKSL and press OK
3. Enter the MIN and select OK
4. Enter the SID and select OK
5. Programming is complete
*
Nokia 3585
*
1. Enter ## followed by the OTKSL
2. Number (MDN) is highlighted. Press the upper left-hand soft key to select
3. Mobile Number will display. Enter the 10 digit MIN
4. Press OK
5. IMSI will appear. Press and hold the Clear key until the display is
empty.
6. Enter 31000 plus the MSID (15 digits total)
7. Press the upper left hand soft key and select OK
8. It will take you back to the SVC Programming. Press the upper right hand
soft key to select EXIT
9. Press END.
10. Phone will power cycle and programming is complete.
*
SK Teletech:
**
SK-IM 1000/1400/2000/2200/2400
*programming: #7583538324#626# *
Getrun 2000:
*
System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)
*
NEOPOINT:
**
Neopoint 1000
*
1. Press M to display Main Menu
2. Scroll to PREFERENCES
3. Press softkey under SELECT
4. Enter 040793
5. Scroll to PROGRAMMING
6. Press softkey under SELECT
7. Enter OTKSL
8. Press softkey under DONE
9. Scroll to PHONE NUMBER
10. Enter 10 digit MIN
11. Scroll to HOME SID
12. Enter SID (4654)
13. Press softkey under SAVE to exit
14. Programming is complete
*
NEOPOINT 1600
*
1. Power the phone on
2. Press the "Menu" key
3. Scroll to "Preferences" - press "Select"
4. Key in the "Field Service Code" (the phone will not prompt you for the
code)
at the "preferences" screen to access the "Service" menu (Default code is
"000000")
5. Scroll to "Programming" - press "Select" - the phone will ask for the
"Subsidy Lock Code"
6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
7. Select the NAM to be programmed (NAM 1 or NAM 2)
8. Program the NAM - Phone number and CDMA Home SID
9. After programming has been completed press "Save" - the phone will reset
*
Audiovox:
**
Audiovox 9100
*
1. Press ##
2. Enter the OTKSL
3. Display will read Service/Menu 1 Basic…press OK
4. Next screen will read Service Mode/Home SID…press OK
5. Next screen will read Service Mode/Home SID…press OK
6. Device will display Service Menu 1. Basic #
7. Press END button to complete programming
*
Handspring TREO:
*
1. Open the flip and press the PHONEBOOK button one time to display the dial
pad
2. Enter ## and the OTKSL using the numbers on the Dial Pad
3. Press the handset button shown in the diagram above
4. At the Activations screen enter the MIN in the phone number field using
the numbers on the device keyboard
5. Put a check in the Enable Number Portability box and type the MSID in the
MSIN field
6. Press OK
7. The device will display the network search pop-up and return to the
Phonebook display
*
Hitachi P300:
*
1. Enter ## and the 6 digit OTKSL
2. Press the Options soft key and then scroll to Save Phone #. Press the OK
soft key.
3. At the NAM display scroll to EDIT and press the OK soft key
4. Display will read NAM and MDN will be highlighted. Press the OK soft key.
5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
6. At the Save prompt press the OK soft key. The next display will show
several options that should not edited.
7. Press the EXIT soft key and the device will power cycle.
8. Programming is complete.
*
Kyosera:
**
Kyocera 2345 1135
*
1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming
*
Kyocera 6035
*
1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.
*
Kyocera 3035
*
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key (Navigation key is the button located between
the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the "clear" key (arrow key
located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation key
13. Press END. Programming is complete.
*
Kyocera 2255
*
1. Press the 1 key six times (111111) "Option will be highlighted
2. Press OK
3. Scroll down to "Programming" and press "OK"
4. Enter OTKSL and press the navigation key
5. "Service Options" will appear scroll down to the "Basic NAM1 Info"
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.
*
QCP 2035
*
1. Press 1 six times (111111)
2. Press u key to select OPTIONS
3. Highlight PROGRAMMING and press u key
4. Enter OTKSL
5. ESN will appear press left arrow key to select OK
6. Enter MIN and press ç key
7. Press ç key again to exit - Programming is complete
*
Sanyo:
**
Sanyo 4000 4500 4700 5000 6000
*
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed – press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete
*
Sanyo 5150 5300 and 6400
*
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming will be displayed. Scroll and highlight Mobile Number.
Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete
*
Sanyo 6000
*
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete
*
Sanyo 4900
*
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK key.
8. Programming is complete
*
Sanyo 6200
*
1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete
*
Toshiba:
**
Toshiba 2032P
*
1. Slide the Radio Standby Switch on the left side of the device to the
upper side (ON) to activate the phone function. This is the switch with the
phone icon over it
2. After power up is completed use the stylus to tap on the ADMIN pull up
menu at the bottom of the screen and select ACTIVATION WIZARD. If your
device has not yet been activated the ACTIVATION WIZARD will automatically
start when you turn on the radio in your device.
3. Tap NEXT 3 times. If the device has been previously activated it will
require only 2 presses.
4. On the fourth screen enter the 6 digit OTKSL using keyboard
5. Enter the MIN in both entery fields then tap NEXT
6. Wait for the device to initialize and display "ready to connect"
7. To initiate IOTA tap the word ADMIN at the bottom of the display and then
Data Provisioning
8. Programming is complete
*******
Here is a list of various codes to try out. Some may require an MSL to be
able to make full use of the functionality.
##2769737 [##BROWSER] - MiniBrowser Settings (2G)
##8626337 [##VOCODER] - Set Vocoder
##3282 [##DATA] - Setup Menu for Vision handsets
##8463 [##TIME] - Airtime Menu
##040793 - Debug Menu
##786 [##RUN] - Technical Information (be careful with this one, you can
reset the handset)
##932 [##WEB] - IP Address information (2G)
##889 [##TTY] - TTY On or TTY Off
##4357 [##HELP] - Help
--
Regards
Priyesh Varghese
Messages in this topic (2)
________________________________________________________________________
1b. Re: : CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Wed Dec 8, 2010 9:27 am ((PST))
hi friends,
those who need more knowledge can see the below link from where these codes
are taken
http://forum.gsmhosting.com/vbb/f128/all-cdma-secret-codes-347440/
regards,
Bandhan Preet Singh
On Wed, Dec 8, 2010 at 4:00 PM, Priyesh Varghese <mail2priyesh@gmail.com>wrote:
>
>
>
>
>
>
> *
>
> CDMA PHONES (FWT+MOBILE) PROGRAMING CODES
>
> Samsung:
> **
>
> All type of phones (old modeles)
> *:
>
> NAM programming: 47*869#08#9
>
> Test mode: *759#813580 or 5809540*45680
>
> exit test mode - 02
>
> A-Key: menu + 0, code 25##
> *
>
> Samsung A500
> *
>
> 1. Enter ## and the 6 digit OTKSL
>
> 2. SERVICE MENU will appear and 1.Basic will be highlighted
>
> 3. Press OK
>
> 4. Device will display NAM CDMA/ Phone Number
>
> 5. Enter 10 digit MIN
>
> 6. Press OK (3 times)
>
> 7. Display will return to Service Menu. Press END.
>
> 8. Programming is complete
> *
>
> Samsung N240 and N400
> *
>
> 1. Enter ## and type in the 6 digit OTKSL
>
> 2. The display will show SVC MENU and 1. Phone Number
>
> 3. Press OK
>
> 4. Enter the 10 digit MIN and press OK
>
> 5. The display will show NAM with Home SID on the second line (Note: SID is
> no longer used)
>
> 6. Press OK
>
> 7. The display will return to the SVC MENU
>
> 8. Press END to complete the programming
> *
>
> Samsung Uproar
> *
>
> 1. Press MENU key
>
> 2. Enter 9 2 0
>
> 3. Enter the OTKSL
>
> 4. At SVC Menu screen press OK
>
> 5. Enter MIN and press OK 4 times
>
> 6. Enter SID (4654) and press OK
>
> 7. Press END key
>
> 8. Programming is complete
> *
>
> Samsung N300
> *
>
> 1. Press ## followed by the OTKSL
>
> 2. SVC menu will be displayed
>
> 3. Press 1 for Phone #
>
> 4. Enter the 10 digit MIN and press OK
>
> 5. MIN that was entered will be displayed press OK
>
> 6. SVC Menu will display press 3 for NAM
>
> 7. Enter the 4 digit Home SID press OK
>
> 8. Press END and handset will power cycle
> *
>
> Samsung i300
> *
>
> 1. Tap on the Phone Icon with stylus
>
> 2. Press #907*9#0 ENTER LOCK should appear on screen
>
> 3. ENTER OTKSL
>
> 4. SVC MENU will appear press 1
>
> 5. Enter 10 digit MIN and then press SAVE
>
> 6. Press SAVE again
>
> 7. Press 3 and then press SAVE 6 times
>
> 8. Enter the HOME SID and press SAVE once
>
> 9. Press END key twice
> *
>
> Samsung A400 and A460
> *
>
> 1. Enter ## and OTKSL
>
> 2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
>
> 3. Enter 10 digit MIN and press OK
>
> 4. At 1.Basic Menu press the END key
>
> 5. Handset will power cycle
> *
>
> Samsung 3500 8500 6100 N200
> *
>
> 1. Press MENU
>
> 2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
>
> 3. Enter OTKSL
>
> 4. Press 1 at SVC MENU Screen
>
> 5. Enter MIN and press OK
>
> 6. Press OK 4 times
>
> 7. Enter SID (4654) and press OK
>
> 8. Press END key
>
> 9. Programming is complete
> *
>
> Qualcomm:
> **
>
> QCP-800
> *programming: menu + 3 + 0.
>
> SPC: "000000" or may be other SPC typed by user.
> *
>
> QCP-820/1920/2035
> *: type "111111" and press Jog Dial.
>
> Choose "Programming" and enter SPC: "000000" or may be other SPC typed by
> user.
> *
>
> QCP 1960 and 2760
> *
>
> 1. Press softkey under the work MENU
>
> 2. Press 8 0
>
> 3. Enter the OTKSL
>
> 4. Press softkey for OK
>
> 5. Enter MIN and press softkey for OK
>
> 6. No SID is require for this handset
>
> 7. Press softkey for EXIT
>
> 8. Programming is complete
> *
>
> LG:
> **
>
> LGC-300
> *programming: menu + 9 and enter SPC: "000000" or may be other SPC typed
> by user
>
> A-Key: press STO for some time while you can see special code enter zone.
> Type 2539** and enter A-key
> *
>
> LGC-330W
> *programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC
> typed by user.
>
> A-Key: type 2539** and enter A-key
> *
>
> LGC-800W /500
> *programming: menu + 0 and enter SPC: "000000" or may be other SPC typed
> by user.
>
> A-Key: type 2539** and enter A-key
> *
>
> LGC-510
> *programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC
> typed by user.
>
> A-Key: type 2539** and enter A-key
> *
>
> LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200
> *
>
> 1. Press ##
>
> 2. Enter the OTKSL
>
> 3. Scroll to SAVE and press OK
>
> 4. Scroll to MIN and press OK
>
> 5. Enter 10 digit MIN scroll to SAVE and press OK
>
> 6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK
> to complete)
>
> 7. Enter SID (4654) and scroll to SAVE and press OK
>
> 8. Programming is complete
> *
>
> LG5350
> *
>
> 1. Enter ## and enter the OTKSL and press the left soft key under the word
> "Save"
>
> 2. At the Service Program display select Mobile Phone # and press the OK in
> the center of the 4 way navigation key
>
> 3. Enter the 10 digit MIN and press OK
>
> 4. Scroll down to 4. Advanced and press OK
>
> 5. Scroll to NMSI and press OK
>
> 6. Enter the MSID and press OK
>
> 7. Scroll down to 9. Amps Phone # and press OK
>
> 8. Enter the MSID and press OK
>
> 9. Press the END key
> *
>
> TP 2100
> *
>
> 1. Press ##
>
> 2. Enter OTKSL
>
> 3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
>
> 4. Select NEXT (by pressing in the roller ball)
>
> 5. Scroll to EDIT and press in the roller ball
>
> 6. Enter MIN
>
> 7. Scroll to SAVE and press roller ball in
>
> 8. Select NEXT at the next 3 screens and then EXIT
>
> 9. Programming is complete
> *
>
> TP3000
> *
>
> 1. Press ##
>
> 2. Enter OTKSL
>
> 3. Scroll to SAVE and press OK
>
> 4. Open flip
>
> 5. Use Stylus to enter the 10 digit MIN
>
> 6. Press OK (No SID entry is required)
>
> 7. Programming is complete
> *
>
> TP 5250
> *
>
> 1. Press ##
>
> 2. Enter the OTKSL
>
> 3. Scroll to SAVE and press OK
>
> 4. The phone display will read SVC Program
>
> 5. Scroll to MOBILE PHONE # and press OK
>
> 6. Phone display will read Mobile Phone Number
>
> 7. Enter the 10 digit MIN and press OK
>
> 8. Scroll to Home SID and press OK
>
> 9. Enter the 4 digit SID (4654) and press OK
>
> 10. Reset Phone will be highlighted. Press OK
>
> 11. Phone will reset
>
> 12. Programming is complete
> *
>
> LG V111(DM110)
> *
>
> [menu]30.
>
> After ask lockcode, enter: 843691.
> *
>
> Ericsson:
> *
>
> Programming:
>
> Shot NAM 987 + menu
>
> Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by
> user.
>
> CDMA mode 904093 + menu
>
> Analog mode 904095 + menu DM mode 904959 + menu
> *
>
> Hyundai:
> **
>
> HGC-120E / -130E
> *programming: #86904**89397# *
>
> HGC-600E
> *programming: ##20022002, END and enter SPC: "000000" or may be other SPC
> typed by user. *
>
> Sony:
> **
>
> CM-M1300/3300/Z200
> *programming: type "111111" and press Jog Dial.
>
> Choose "Programming" and enter SPC: "000000" or may be other SPC typed by
> user.
> *
>
> Sony CM-M1300
> *
>
> 1. Power phone on
>
> 2. Enter six "1s" ( 111111 )
>
> 3. Press the jog dial in
>
> 4. Press the jog dial in again to select programming
>
> 5. Enter six "0s" for the service security code
>
> 6. Phone displays the ESN
>
> 7. Press the jog dial in for OK
>
> 8. Enter your ten digit cellular telephone number
>
> 9. Press the jog dial in for OK
>
> 10. Enter your cellular carrier's system ID (SID) without the zeros
>
> (Example: if your carrier's system ID is 00035, enter just 35)
>
> 11. Press the jog dial in for OK
>
> 12. Enter a name for NAM 1 or just press the jog dial in for OK
>
> 13. Phone displays Basic NAM 1 Programming is complete
>
> 14. Press the jog dial in
>
> 15. Press the jog dial in again for EXIT
>
> 16. Phone powers itself off
>
> 17. Press the power button to power the phone back on
>
> 18. Basic programming is complete
> *
>
> Motorola:
> **
>
> StarTAC 7760/7860
> *programming:
>
> Service menu: FCN+0+000000+000000+RCL
>
> Test mode: FCN 00**83786633 STO
> *
>
> V60c
> *programming:
>
> Service menu: 74663 # [Menu] [Menu] (programming code)
>
> Test mode: [Menu] 073887 * (security code = 000000)
> *
>
> Motorola Tarpon (120x)
> *
>
> 1. Press 74663 (spells PHONE)
>
> 1. Press # MENU MENU quickly
>
> 2. Enter OTKSL
>
> 3. The work MIN will be highlighted
>
> 4. Select the word CHANGE by selecting the top right button
>
> 5. Select DELETE. Press and hold the button until clear
>
> 6. Have the customer enter the 10 digit MIN number
>
> 7. Select OK with the top right button. The "User Activation" screen will
> appear
>
> 8. Scroll to highlight the CDMA Sys ID
>
> 9. Select CHANGE by selecting the top right button
>
> 10. Enter SID
>
> 11. Select OK by selecting the top right button
>
> 12. Select DONE with the top left button
>
> 13. Press the END key
>
> 14. Press # MENU MENU quickly
>
> 15. Enter OTKSL
>
> 16. The work MIN will be highlighted
>
> 17. Select the word CHANGE by selecting the top right button
>
> 18. Select DELETE. Press and hold the button until clear
>
> 19. Have the customer enter the 10 digit MIN number
>
> 20. Select OK with the top right button. The "User Activation" screen will
> appear
>
> 21. Scroll to highlight the CDMA Sys ID
>
> 22. Select CHANGE by selecting the top right button
>
> 23. Enter SID
>
> 24. Select OK by selecting the top right button
>
> 25. Select DONE with the top left button
>
> Press the END key
> *
>
> Motorola Phones (ALL)
> *
>
> 1. Enter 74663 # FCN FCN
>
> 2. Enter OTKSL
>
> 3. Enter MIN and press STO
>
> 4. Enter SID (4654) and press STO
>
> 5. Press STO again – programming is complete
>
> Note: on the Tarpon (120C) you will need to press the MENU key instead of
> FCN.
> *
>
> Nokia:
> **
>
> 5185/6185
> *programming: *3001#12345#
>
> Software version: *#837# or *#VER# or *#9999#
>
> Serial / ESN: *#92772689# or *#WARRANTY#
>
> Phone reset: *#75681# or *#75682#
> *
>
> Nokia 6185-5170
> *
>
> 1. Press *#639#
>
> 2. Enter OTKSL and press OK
>
> 3. Enter the MIN and select OK
>
> 4. Enter the SID and select OK
>
> 5. Programming is complete
> *
>
> Nokia 3585
> *
>
> 1. Enter ## followed by the OTKSL
>
> 2. Number (MDN) is highlighted. Press the upper left-hand soft key to
> select
>
> 3. Mobile Number will display. Enter the 10 digit MIN
>
> 4. Press OK
>
> 5. IMSI will appear. Press and hold the Clear key until the display is
> empty.
>
> 6. Enter 31000 plus the MSID (15 digits total)
>
> 7. Press the upper left hand soft key and select OK
>
> 8. It will take you back to the SVC Programming. Press the upper right hand
> soft key to select EXIT
>
> 9. Press END.
>
> 10. Phone will power cycle and programming is complete.
> *
>
> SK Teletech:
> **
>
> SK-IM 1000/1400/2000/2200/2400
> *programming: #7583538324#626# *
>
> Getrun 2000:
> *
>
> System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
>
>
> Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
>
> Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
>
> Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
>
> System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)
> *
>
> NEOPOINT:
> **
>
> Neopoint 1000
> *
>
> 1. Press M to display Main Menu
>
> 2. Scroll to PREFERENCES
>
> 3. Press softkey under SELECT
>
> 4. Enter 040793
>
> 5. Scroll to PROGRAMMING
>
> 6. Press softkey under SELECT
>
> 7. Enter OTKSL
>
> 8. Press softkey under DONE
>
> 9. Scroll to PHONE NUMBER
>
> 10. Enter 10 digit MIN
>
> 11. Scroll to HOME SID
>
> 12. Enter SID (4654)
>
> 13. Press softkey under SAVE to exit
>
> 14. Programming is complete
> *
>
> NEOPOINT 1600
> *
>
> 1. Power the phone on
>
> 2. Press the "Menu" key
>
> 3. Scroll to "Preferences" - press "Select"
>
> 4. Key in the "Field Service Code" (the phone will not prompt you for the
> code)
>
> at the "preferences" screen to access the "Service" menu (Default code is
> "000000")
>
> 5. Scroll to "Programming" - press "Select" - the phone will ask for the
> "Subsidy Lock Code"
>
> 6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
>
> 7. Select the NAM to be programmed (NAM 1 or NAM 2)
>
> 8. Program the NAM - Phone number and CDMA Home SID
>
> 9. After programming has been completed press "Save" - the phone will reset
>
> *
>
> Audiovox:
> **
>
> Audiovox 9100
> *
>
> 1. Press ##
>
> 2. Enter the OTKSL
>
> 3. Display will read Service/Menu 1 Basic…press OK
>
> 4. Next screen will read Service Mode/Home SID…press OK
>
> 5. Next screen will read Service Mode/Home SID…press OK
>
> 6. Device will display Service Menu 1. Basic #
>
> 7. Press END button to complete programming
> *
>
> Handspring TREO:
> *
>
> 1. Open the flip and press the PHONEBOOK button one time to display the
> dial pad
>
> 2. Enter ## and the OTKSL using the numbers on the Dial Pad
>
> 3. Press the handset button shown in the diagram above
>
> 4. At the Activations screen enter the MIN in the phone number field using
> the numbers on the device keyboard
>
> 5. Put a check in the Enable Number Portability box and type the MSID in
> the MSIN field
>
> 6. Press OK
>
> 7. The device will display the network search pop-up and return to the
> Phonebook display
> *
>
> Hitachi P300:
> *
>
> 1. Enter ## and the 6 digit OTKSL
>
> 2. Press the Options soft key and then scroll to Save Phone #. Press the OK
> soft key.
>
> 3. At the NAM display scroll to EDIT and press the OK soft key
>
> 4. Display will read NAM and MDN will be highlighted. Press the OK soft
> key.
>
> 5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
>
> 6. At the Save prompt press the OK soft key. The next display will show
> several options that should not edited.
>
> 7. Press the EXIT soft key and the device will power cycle.
>
> 8. Programming is complete.
> *
>
> Kyosera:
> **
>
> Kyocera 2345 1135
> *
>
> 1. Press 111111 (#1 key 6 times)
>
> 2. Option will be highlighted
>
> 3. Press OK
>
> 4. Scroll down to Programming
>
> 5. The service programming dialog will appear Enter Security Code.
>
> 6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
>
> 7. Service Options will appear
>
> 8. Scroll down to the BASIC NAM1 Info
>
> 9. Press OK
>
> 10. Select the Phone Number by pressing the OK key
>
> 11. Using the keypad enter the 10 digit MIN
>
> 12. Press OK
>
> 13. Press END to complete the programming
> *
>
> Kyocera 6035
> *
>
> 1. Press 1 six times (111111) and select OPTIONS
>
> 2. Select PROGRAMMING
>
> 3. Open flip
>
> 4. Tap the OTKSL on keypad on the screen. Tap OK
>
> 5. Tap on the PHONE NUMBER field. Enter MIN.
>
> 6. Leave A-KEY blank
>
> 7. Enter HOME SID (4654)
>
> 8. Tap SAVE & EXIT
>
> 9. Tap YES
>
> 10. Phone will be in OFF MODE Close flip.
> *
>
> Kyocera 3035
> *
>
> 1. Press 111111 (the #1 key six times)
>
> 2. Options will be highlighted
>
> 3. Press in the navigation key (Navigation key is the button located
> between the TALK & END key)
>
> 4. Scroll to PROGRAMMING using the Navigation key
>
> 5. Select PROGRAMMING by pressing in the Navigation key
>
> 6. Enter the six digit OTKSL and press in the navigation key
>
> 7. SERVICE OPTIONS will appear
>
> 8. Scroll down to the Basic NAM1 info
>
> 9. Press in the navigation key
>
> 10. Clear any numbers that may appear using the "clear" key (arrow key
> located directly below the navigation key)
>
> 11. Select the PHONE NUMBER by pressing in the navigation key
>
> 12. Enter the 10 digit MIN select OK by pressing in the navigation key
>
> 13. Press END. Programming is complete.
> *
>
> Kyocera 2255
> *
>
> 1. Press the 1 key six times (111111) "Option will be highlighted
>
> 2. Press OK
>
> 3. Scroll down to "Programming" and press "OK"
>
> 4. Enter OTKSL and press the navigation key
>
> 5. "Service Options" will appear scroll down to the "Basic NAM1 Info"
>
> 6. Press OK
>
> 7. Select Phone Number by pressing OK
>
> 8. Enter MIN and press OK again
>
> 9. Scroll to Home SID and press OK
>
> 10. Enter SID (4654) and press OK
>
> 11. Press END. Programming is complete.
> *
>
> QCP 2035
> *
>
> 1. Press 1 six times (111111)
>
> 2. Press u key to select OPTIONS
>
> 3. Highlight PROGRAMMING and press u key
>
> 4. Enter OTKSL
>
> 5. ESN will appear press left arrow key to select OK
>
> 6. Enter MIN and press ç key
>
> 7. Press ç key again to exit - Programming is complete
> *
>
> Sanyo:
> **
>
> Sanyo 4000 4500 4700 5000 6000
> *
>
> 1. Press ##
>
> 2. Enter the OTKSL
>
> 3. Scroll to SAVE and press OK
>
> 4. ESN will be displayed – press OK
>
> 5. Enter 10 digit MIN and press OK
>
> 6. Enter SID (4654) and press OK
>
> 7. Press OK twice
>
> 8. Programming is complete
> *
>
> Sanyo 5150 5300 and 6400
> *
>
> 1. Enter ## followed by the OTKSL
>
> 2. Press MENU SAVE PHONE #
>
> 3. Press Ok
>
> 4. SVC Programming will be displayed. Scroll and highlight Mobile Number.
> Press OK
>
> 5. Press OK again
>
> 6. ESN will be displayed. Press OK
>
> 7. Mobile Number will be displayed enter the 10 digit MIN press OK
>
> 8. Press OK 4 times
>
> 9. Phone will power cycle
>
> 10. Programming is complete
> *
>
> Sanyo 6000
> *
>
> 1. Press ##
>
> 2. Enter OTKSL
>
> 3. Press MENU Key and scroll to SAVE PHONE # and press OK
>
> 4. ESN will be displayed press OK
>
> 5. Enter MIN and press OK
>
> 6. Enter SID and press OK
>
> 7. Press OK twice more
>
> 8. Programming is complete
> *
>
> Sanyo 4900
> *
>
> 1. Enter ## followed by the 6 digit OTKSL
>
> 2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
>
> 3. Press MENU/OK
>
> 4. Scroll and highlight MOBILE NUMBER press OK
>
> 5. At the ESN display press OK
>
> 6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
>
> 7. At the service program menu scroll to exit and press the MENU/OK key.
>
> 8. Programming is complete
> *
>
> Sanyo 6200
> *
>
> 1. Enter ##
>
> 2. Enter OTKSL
>
> 3. Press the MENU key and scroll to highlight SAVE PHONE #
>
> 4. Press OK
>
> 5. Scroll and highlight MOBILE NUMBER
>
> 6. Press OK twice
>
> 7. Scroll and highlight EXIT
>
> 8. Press OK
>
> 9. Phone will power cycle
>
> 10. Programming is complete
> *
>
> Toshiba:
> **
>
> Toshiba 2032P
> *
>
> 1. Slide the Radio Standby Switch on the left side of the device to the
> upper side (ON) to activate the phone function. This is the switch with the
> phone icon over it
>
> 2. After power up is completed use the stylus to tap on the ADMIN pull up
> menu at the bottom of the screen and select ACTIVATION WIZARD. If your
> device has not yet been activated the ACTIVATION WIZARD will automatically
> start when you turn on the radio in your device.
>
> 3. Tap NEXT 3 times. If the device has been previously activated it will
> require only 2 presses.
>
> 4. On the fourth screen enter the 6 digit OTKSL using keyboard
>
> 5. Enter the MIN in both entery fields then tap NEXT
>
> 6. Wait for the device to initialize and display "ready to connect"
>
> 7. To initiate IOTA tap the word ADMIN at the bottom of the display and
> then Data Provisioning
>
> 8. Programming is complete
>
> *******
>
> Here is a list of various codes to try out. Some may require an MSL to be
> able to make full use of the functionality.
>
> ##2769737 [##BROWSER] - MiniBrowser Settings (2G)
>
> ##8626337 [##VOCODER] - Set Vocoder
>
> ##3282 [##DATA] - Setup Menu for Vision handsets
>
> ##8463 [##TIME] - Airtime Menu
>
> ##040793 - Debug Menu
>
> ##786 [##RUN] - Technical Information (be careful with this one, you can
> reset the handset)
>
> ##932 [##WEB] - IP Address information (2G)
>
> ##889 [##TTY] - TTY On or TTY Off
>
> ##4357 [##HELP] - Help
>
>
>
> --
> Regards
> Priyesh Varghese
>
>
--
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (2)
________________________________________________________________________
________________________________________________________________________
2. District conference of Guntur SSA A.P. minutes and photos
Posted by: "laxman kumar" blaxman_76@yahoo.com blaxman_76
Date: Wed Dec 8, 2010 5:13 am ((PST))
dear all
Guntur SSA District conference and welcome party to the 2009 batch TTAs was held
on 06-12-2010
in the Telephone Exchange premises.kindly find the photos and minutes in the
attachments
regards
B.LAXMAN KUMAR
TTA NIB GUNTUR
ORGANISING SECRETERY APSNATTA FOR GUNTUR
9441205600
2 of 2 File(s) http://groups.yahoo.com/group/TTABSNL/attachments/folder/987487917/item/list
dist.conference guntur ssa.pdf
photos gtr ssa.pdf
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
3. can anybody tell me how much strength we have.
Posted by: "vaishakh soni" vaishakhs@yahoo.co.in vaishakhs
Date: Wed Dec 8, 2010 5:15 am ((PST))
hi,
every body,
just i want to know that how much strength of new TTA ( DRTTA) in all india
basis.
i thing this is much enough to influence any union to agree our demands.
-Vaishakh Soni
B.E.(Electronics)
9426724484
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
4a. Re: LTC Eligibility
Posted by: "Hem Tripathi" hem_bsnl@yahoo.co.in hem_bsnl
Date: Wed Dec 8, 2010 9:25 am ((PST))
i think.you aren't eligible, contact ur admn sec.
________________________________
From: phanil <phanil@rocketmail.com>
To: TTABSNL@yahoogroups.com
Sent: Tue, 7 December, 2010 7:34:04 PM
Subject: TTABSNL LTC Eligibility
Hi dear friend
I am Anil from Kersls Circle.I had joined as TTA on Sep/2010 (On probation).Can
you tell me that whether I can avail LTC now ?
ANIL.P.H
Palakkad SSA
Kerala
9497421795
Messages in this topic (3)
________________________________________________________________________
4b. Re: LTC Eligibility
Posted by: "rahul kaushik" rahul_kaushik_mail@yahoo.com rahul_kaushik_mail
Date: Wed Dec 8, 2010 10:24 pm ((PST))
hello friend
     To Avail LTC u must have  30 Earned Leave Balance in ur pocket .
It Means u must have 40+ EL by which u can have 30 balance after avail 10 of them for LTC.so I think U cant avail LTC at this moment but from Jan,2011 u can avail.
Â
Â
Â
Rahul Kaushik
           T.T.A.
Rohtak(Haryana)
--- On Tue, 12/7/10, phanil <phanil@rocketmail.com> wrote:
From: phanil <phanil@rocketmail.com>
Subject: TTABSNL LTC Eligibility
To: TTABSNL@yahoogroups.com
Date: Tuesday, December 7, 2010, 7:34 PM
Â
Hi dear friend
I am Anil from Kersls Circle.I had joined as TTA on Sep/2010 (On probation).Can you tell me that whether I can avail LTC now ?
ANIL.P.H
Palakkad SSA
Kerala
9497421795
Messages in this topic (3)
________________________________________________________________________
________________________________________________________________________
5. Important Notice for CEC
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Wed Dec 8, 2010 9:26 am ((PST))
*C.E.C. meeting of SNATTA is scheduled on 17.12.2010* in the *CTO, Sabhaghar
*, adjacent to the *Bharat Sanchar Bhavan, BSNL Corporate Office, New Delhi*.
*All the Central Coordinator, Circle President, Circle Secretary of each
circle should participate in the C.E.C. Click
here<http://snatta.org/news/notice.doc>
*
* All the Circle Secretaries are requested to talk to the respective
District Secretaries and take their district views regarding the 5th
membership verification and get a compiled report before coming to C.E.C. in
New Delhi. District Secretaries should also ensure that their district views
reaches the Circle Secretaries well before the conduct of C.E.C on
17.12.2010.*
* This is very essential for taking Just, Fair and Democratic decision in
the C.E.C.*
--
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
6a. hai
Posted by: "ANUSHA THOKALA" anushathokala@yahoo.com anushathokala
Date: Wed Dec 8, 2010 9:29 am ((PST))
hai friends iam working in a.p circle mahaboobnagar (ssa) .any body who belongs to this district who are working either of the following districts1.hyderabad 2.vijayawada.3.warangal.plz contact me mobile number 9490205556 or vasuthokala400@gmail.com for mutual transfer
kindly add my data to database
Messages in this topic (6)
________________________________________________________________________
________________________________________________________________________
7. BSNL seeks 5k cr more to build defence network
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Wed Dec 8, 2010 10:01 pm ((PST))
*BSNL seeks 5k cr more to build defence network*
BSNL has overshot its budget for building an alternate communication
networks for the armed forces by a huge 50% and will soon seek an additional
funding of Rs 5,354.55 crore from the Centre, executives familiar with the
development told ET.
This is in addition to the Rs 9,175.16 crore that the company has already
been awarded fr this project. The telecom ministry within the next couple of
days will move a cabinet note seeking a 50% hike in the budget for this
project, executives linked with the project added. In December 2009, the
Union Cabinet, had approved the Rs 9,175-crore plan to build an alternate
optic fibre cable (OFC) network for the defence services paving the way for
the auction of third generation spectrum to be held this year.* BSNL has not
provided any explanation so far for overshooting its budget. *
The armed forces will move their communication requirements to this network
to be built by BSNL, thus freeing airwaves for commercial telephony Rs The
armed forces had vacated 3G frequencies in August 2010 after it they had
been assured by the Centre that the telecoms department would keep its side
of the bargain in rolling out this alternate network as scheduled.
This enabled the telecoms department to allot 3G bandwidth to the winners of
the auction on Sept 1, paving the way for consumers to enjoy high-end
services such as video calling, interactive gaming and high-speed internet
using phones by the end of the calendar year. MP Birla Group company Vindhya
Telelink had earlier this year bagged a Rs 7,582-cr contract from BSNL to
build an OFC network for the armed forces.
--
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
8. Laser Hair reduction: Health Tip of the Day!
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Wed Dec 8, 2010 10:02 pm ((PST))
-
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
9. Poisoning: Health Tip of the Day!
Posted by: "Bandhan.P.Singh" email13@gmail.com bsnl_chd
Date: Wed Dec 8, 2010 10:19 pm ((PST))
-
regards,
*Bandhan Preet Singh,* <http://www.youtube.com/watch?v=1jSFkRp_0ZI>
Broadband Engineer (TTA),
BSNL <http://www.bsnl.co.in>, Mohali, Chd, Punjab<http://www.punjab.bsnl.co.in>
.
*Think Different...Think Good..!! *
"*THINK *GOOD--*SPREAD *GOOD, *DO *GOOD--*HAVE *GOOD"
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
10.1. mutual transfer
Posted by: "Kamal" shail_kamal@yahoo.com shail_kamal
Date: Wed Dec 8, 2010 10:25 pm ((PST))
hai friends iam working in haryana circle Hisar (ssa).any body who want s mutual transfer to( jind , panipat ,karnal,faridadad)in haryana circle,or (ghaizabad,muzafarnagar,meeerut,kanpur,lucknow)in up Citcle or Uttrakhand circle.
plz conttact at
Er. Shailendra Kamal
T.T.A.(Groups)
mob-9467028111,7876030500
ph-01696-217002,01696-224400
Messages in this topic (81)
________________________________________________________________________
________________________________________________________________________
11. REGARDING MUTUAL TRANSFER ....
Posted by: "shahid ahmed" sh1_ahmed84@yahoo.com sh1_ahmed84
Date: Wed Dec 8, 2010 10:26 pm ((PST))
Is any body instrested to mutual transfer from meerut to muzaffarnagar ssa upwest. pls contact me.
Er. Shahid Ahmed
TTA Khatauli MUZAFFARNAGAR UP WEST
9410890912
Messages in this topic (1)
Please visit us at www.snatta.org for more details.
------------------------------------------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/TTABSNL/
<*> Your email settings:
Digest Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/TTABSNL/join
(Yahoo! ID required)
<*> To change settings via email:
TTABSNL-normal@yahoogroups.com
TTABSNL-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
TTABSNL-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
------------------------------------------------------------------------
No comments:
Post a Comment